Switch the chemical to calcium hardness to dose calcium chloride: about 1.2 lb of 77% flakes per 10 ppm per 10,000 gallons.
How pool volume is calculated
PoolVolume multiplies the surface area by the average depth. Rectangle: length × width. Round: π × (diameter ÷ 2)². Oval: π ÷ 4 × length × width. Kidney: 0.45 × (wide end + narrow end) × length, a common estimate for free-form pools. Cubic feet × 7.48 gives US gallons; cubic metres × 1,000 gives litres.
Round above-ground pools (46 in of water)
| Diameter | US gallons |
|---|---|
| 12 ft | 3,240 |
| 15 ft | 5,070 |
| 18 ft | 7,300 |
| 21 ft | 9,930 |
| 24 ft | 12,970 |
| 27 ft | 16,420 |
| 30 ft | 20,270 |
How chemical doses are calculated
One ppm is one milligram per litre, so the grams of active chemical needed are the ppm increase × litres ÷ 1,000. That is divided by the product's strength. Alkalinity is measured as calcium carbonate, so baking soda doses use the ratio of their equivalent weights (84 ÷ 50); calcium chloride doses use 111 ÷ 100 and the product's purity.
Amount for 10,000 US gallons
| Product | Raises by | US | Metric |
|---|---|---|---|
| Liquid chlorine 12.5% | 1 ppm | 10.2 fl oz | 303 mL |
| Liquid chlorine 10% | 1 ppm | 12.8 fl oz | 379 mL |
| Household bleach 6% | 1 ppm | 21.3 fl oz | 631 mL |
| Cal-hypo shock 65% | 1 ppm | 2.1 oz | 58 g |
| Dichlor granules 56% | 1 ppm | 2.4 oz | 68 g |
| Trichlor tablets 90% | 1 ppm | 1.5 oz | 42 g |
| Stabilizer (cyanuric acid granules) | 10 ppm | 13.4 oz | 379 g |
| Baking soda (sodium bicarbonate) | 10 ppm | 1.4 lb | 635 g |
| Calcium chloride 77% (dihydrate flakes) | 10 ppm | 1.2 lb | 545 g |
| Pool salt (sodium chloride) | 100 ppm | 8.35 lb | 3.79 kg |
Estimates by mass balance; products vary in strength and liquid chlorine weakens with age and heat. Add chemicals in stages, never mix products together, follow each label's safety directions and retest. Typical targets are general guidance; follow your test kit, pool surface and equipment manufacturer.
Frequently asked questions
How much baking soda for a 15,000 gallon pool?
About 2.1 lb per 10 ppm of alkalinity.
Does baking soda raise pH?
Only slightly. To raise pH more, soda ash (sodium carbonate) is used.
What should total alkalinity be?
About 80–120 ppm is a common target.
Is PoolVolume free?
Yes, with no sign-up or ads.
Are my pool details saved?
Yes, in this browser only.