Shock at dusk, with the pump running, and keep swimmers out until chlorine is back in the normal range.
How pool volume is calculated
PoolVolume multiplies the surface area by the average depth. Rectangle: length × width. Round: π × (diameter ÷ 2)². Oval: π ÷ 4 × length × width. Kidney: 0.45 × (wide end + narrow end) × length, a common estimate for free-form pools. Cubic feet × 7.48 gives US gallons; cubic metres × 1,000 gives litres.
Round above-ground pools (46 in of water)
| Diameter | US gallons |
|---|---|
| 12 ft | 3,240 |
| 15 ft | 5,070 |
| 18 ft | 7,300 |
| 21 ft | 9,930 |
| 24 ft | 12,970 |
| 27 ft | 16,420 |
| 30 ft | 20,270 |
How chemical doses are calculated
One ppm is one milligram per litre, so the grams of active chemical needed are the ppm increase × litres ÷ 1,000. That is divided by the product's strength. Alkalinity is measured as calcium carbonate, so baking soda doses use the ratio of their equivalent weights (84 ÷ 50); calcium chloride doses use 111 ÷ 100 and the product's purity.
Amount for 10,000 US gallons
| Product | Raises by | US | Metric |
|---|---|---|---|
| Liquid chlorine 12.5% | 1 ppm | 10.2 fl oz | 303 mL |
| Liquid chlorine 10% | 1 ppm | 12.8 fl oz | 379 mL |
| Household bleach 6% | 1 ppm | 21.3 fl oz | 631 mL |
| Cal-hypo shock 65% | 1 ppm | 2.1 oz | 58 g |
| Dichlor granules 56% | 1 ppm | 2.4 oz | 68 g |
| Trichlor tablets 90% | 1 ppm | 1.5 oz | 42 g |
| Stabilizer (cyanuric acid granules) | 10 ppm | 13.4 oz | 379 g |
| Baking soda (sodium bicarbonate) | 10 ppm | 1.4 lb | 635 g |
| Calcium chloride 77% (dihydrate flakes) | 10 ppm | 1.2 lb | 545 g |
| Pool salt (sodium chloride) | 100 ppm | 8.35 lb | 3.79 kg |
Estimates by mass balance; products vary in strength and liquid chlorine weakens with age and heat. Add chemicals in stages, never mix products together, follow each label's safety directions and retest. Typical targets are general guidance; follow your test kit, pool surface and equipment manufacturer.
Frequently asked questions
How many bags of shock for a 20,000 gallon pool?
Raising chlorine by 10 ppm with 65% cal-hypo takes about 2.6 lb, so about three 1 lb bags.
Is liquid chlorine better than shock powder?
Liquid adds nothing but chlorine and salt. Cal-hypo adds calcium and dichlor adds stabilizer, which can build up.
When can I swim after shocking?
When free chlorine is back to your normal level; follow the product label.
Is PoolVolume free?
Yes, with no sign-up or ads.
Are my pool details saved?
Yes, in this browser only.